Health assessment of emerging persistent organic pollutants (POPs) in PM2.5 in northern and central Taiwan.

Over the last two decades, Taiwan has effectively diminished atmospheric concentrations of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) through the adept utilization of advanced technologies and the implementation of air pollution control devices. Despite this success, there exists a dearth of data regarding the levels of other PM2.5-bound organic pollutants and their associated health risks. To address this gap, our study comprehensively investigates the spatial and seasonal variations, potential sources, and health risks of PCDD/Fs, Polychlorinated biphenyls (PCBs), and Polychlorinated naphthalene (PCNs) in Northern and Central Taiwan. Sampling collections were conducted at three specific locations, including six municipal waste incinerators in Northern Taiwan, as well as a traffic and an industrial site in Central Taiwan. As a result, the highest mean values of PM2.5 (20.3-39.6 µg/m3) were observed at traffic sites, followed by industrial sites (14.4-39.3 µg/m3), and the vicinity of the municipal waste incinerator (12.4-29.4 µg/m3). Additionally, PCDD/Fs and PCBs exhibited discernible seasonal fluctuations, displaying higher concentrations in winter (7.53-11.9 and 0.09-0.12 fg I-TEQWHO/m3) and spring (7.02-13.7 and 0.11-0.16 fg I-TEQWHO/m3) compared to summer and autumn. Conversely, PCNs displayed no significant seasonal variations, with peak values observed in winter (0.05-0.10 fg I-TEQWHO/m3) and spring (0.03-0.08 fg I-TEQWHO/m3). Utilizing a Positive Matrix Factorization (PMF) model, sintering plants emerged as the predominant contributors to PCDD/Fs, constituting 77.9% of emissions. Woodchip boilers (68.3%) and municipal waste incinerators (21.0%) were identified as primary contributors to PCBs, while municipal waste incinerators (64.6%) along with a secondary copper and a copper sludge smelter (22.1%) were the principal sources of PCNs. Moreover, the study specified that individuals aged 19-70 in Northern Taiwan and those under the age of 12 years in Central Taiwan were found to have a significantly higher cancer risk, with values ranging from 9.26 x 10-9-1.12 x 10-7 and from 2.50 x 10-8-2.08 x 10-7respectively.

Prediction of Base-Catalyzed Hydrolysis Kinetics of Polychlorinated Dibenzo-p-Dioxins by Density Functional Theory Calculations.

Polychlorinated dibenzo-p-dioxins (PCDDs), comprising 75 congeners, have gained considerable attention from the general public and the scientific community owing to their high toxic potential. The base-catalyzed hydrolysis of PCDDs is crucial for the assessment of their environmental persistence. Nonetheless, owing to the substantial number of congeners and low hydrolysis rates of PCDDs, conducting hydrolysis experiments proves to be exceedingly time-consuming and financially burdensome. Herein, density functional theory and transition state theory were employed to predict the base-catalyzed hydrolysis of PCDDs in aquatic environments. Findings reveal that PCDDs undergo base-catalyzed hydrolysis in aquatic environments with two competing pathways: prevailing dioxin ring-opening and reduced reactivity in the hydrolytic dechlorination pathway. The resultant minor products include hydroxylated PCDDs, which exhibit thermodynamic stability surpassing that of the principal product, chlorinated hydroxydiphenyl ethers. The half-lives (ranging from 17.10 to 1.33 × 1010 h at pH = 8) associated with the base-catalyzed hydrolysis of PCDDs dissolved in water were shorter compared to those within the water-sediment environmental system. This observation implies that hydroxide ions can protect aquatic environments from PCDD contamination. Notably, this study represents the first attempt to predict the base-catalyzed hydrolysis of PCDDs by using quantum chemical methods.

Probabilistic human health risk assessment of PCDD/Fs near municipal solid-waste incinerator using Monte Carlo analysis coupled with triangular fuzzy numbers.

PCDD/Fs are dioxins produced by waste incineration and pose risks to human health. We aimed to detail the health risks of airborne and soil PCDD/Fs near a municipal solid-waste incinerator (MSWI) for the surrounding population and develop a new model that improves upon existing methods. Thus, we conducted field sampling and then investigated a MSWI in the Pearl River Delta (2016-2018). Our results showed that the carcinogenic and non-carcinogenic risk values of PCDD/Fs exposed to residents in nearby areas were acceptable, with hazard index (HI) values lower than 1.0 and a total carcinogenic risk lower than 1.0E-6. Notably, the results raised concerns regarding higher non-carcinogenic risks in children than in adults. Comparative analysis of the frequency accumulation diagram, accumulated probability risk, and the absolute value of error (δ) between the 95% confidence interval (CI) and the 90% CI of the Monte Carlo stochastic simulation-triangular fuzzy number (MCSS-TFN) and the MCSS model, respectively, demonstrated that the MCSS-TFN exhibited less uncertainty than the MCSS model, regardless of the health risk value of PCDD/Fs in ambient air or in soil. This observation underscores the superiority of the MCSS-TFN model over other models in assessing the health risks associated with PCDD/Fs in situations with limited data. Our new method overcomes the limited dataset size and high uncertainty in assessing the health risks of dioxin substances, providing a more comprehensive understanding of their associated health risks than MCSS models.

Results of an international interlaboratory study on dioxin-like activities in drinking-, river surface- and wastewater using DR CALUX bioassay.

Aquatic animals and consumers of aquatic animals are exposed to increasingly complex mixtures of known and as-yet-unknown chemicals with dioxin-like toxicities in the water cycle. Effect- and cell-based bioanalysis can cover known and yet unknown dioxin and dioxin-like compounds as well as complex mixtures thereof but need to be standardized and integrated into international guidelines for environmental testing. In an international laboratory testing (ILT) following ISO/CD 24295 as standard procedure for rat cell-based DR CALUX un-spiked and spiked extracts of drinking-, surface-, and wastewater were validated to generate precision data for the development of the full ISO-standard. We found acceptable repeatability and reproducibility ranges below 36 % by DR CALUX bioassay for the tested un-spiked and spiked water of different origins. The presence of 17 PCDD/Fs and 12 dioxin-like PCBs was also confirmed by congener-specific GC-HRMS analysis. We compared the sum of dioxin-like activity levels measured by DR CALUX bioassay (expressed in 2,3,7,8-TCDD Bioanalytical Equivalents, BEQ; ISO 23196, 2022) with the obtained GC-HRMS chemical analysis results converted to toxic equivalents (TEQ; van den Berg et al., 2013).

Distributions of PCDD/Fs, PCBs, and PCNs in coastal sediments collected from major industrial bays in South Korea.

Polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were assessed in coastal sediments from industrial bays in South Korea to evaluate the pollution levels and their environmental impact. The mean sediment concentrations of Σ17 PCDD/Fs, Σ18 PCBs, and Σ15 PCNs were 198 ± 140, 3427 ± 7037, and 85 ± 336 pg/g dw, respectively. Generally, pollutant concentrations in the inner bay were higher than those in the outer bay, indicating the influence of industrial emissions and harbor activities. The primary sources were identified as steel manufacturing and wastewater treatment plants for PCDD/Fs, harbor and shipbuilding activities for PCBs, and combustion-related sources for PCNs. Notably, PCDD/F concentrations exceeded sediment guideline values. The combined effects of PCDD/Fs and PCBs demonstrated adverse impacts on aquatic organisms. Hence, the release of toxic pollutants into the marine environment could have potential biological effects due to the combined impact of these various compounds.

Polychlorinated dibenzodioxins/furans and dioxin-like polychlorinated biphenyls in fish and crustaceans of a recreationally fished estuary, following targeted remediation.

Polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) are a suite of harmful chemicals (hereafter collectively referred to as 'dioxins'), and their emission into aquatic habitats leads to persistent contamination of sediments, aquatic food-webs, and seafoods. Quantifying contaminant levels in seafood species is important for the ongoing management of exposure risk by fishers, particularly after any remediation actions. We present dioxin concentrations in four seafood species (Yellowfin Bream Acanthopagrus australis, Sea Mullet Mugil cephalus, Eastern School Prawn Metapenaeus macleayi, and Eastern King Prawn Penaeus plebejus) in a recreationally fished estuary, in relation to a contaminated site that has undergone a remediation process, partially removing contaminated sediments (Homebush Bay, Port Jackson, New South Wales, Australia). Dioxin concentrations in these species were measured before (2005/6) and after (2015/16) remediation at a range of locations in and around the remediated site. Dioxin concentrations and congener profiles differed substantially among taxa, and concentrations were frequently higher than Australian screening criteria. The two prawn species showed evidence of a decline in dioxin concentrations after remediation, but the fish species only showed a declining dioxin concentration with distance from the contaminated site (not between periods). There were some minor changes in the congener profile for some species following remediation. While there was evidence for greatly reduced dioxin concentrations in prawn species following remediation, the complex patterns for fish were likely affected by environmental changes, species-specific and temporal changes in lipid content, and animal movement patterns. Future monitoring may aid interpretation of the patterns and modelling of exposure risk associated with seafood consumption into the future.

Polychlorinated Naphthalenes in Foods from the French Market: Occurrence, Dietary Exposure, and Evaluation of Relative Contributions to Dioxin-like Contaminants.

Despite the growing interest in PCNs and the dioxin-like toxicity exhibited by a number of congeners, a comprehensive assessment of their contribution to the cocktail of dioxin-like contaminants is still lacking. To address such a shortcoming, this study investigated the PCN contamination in foodstuffs recently acquired in France, together with that of the regulatory polychlorinated dibenzodioxins/furans (PCDD/Fs) and polychlorinated biphenyls (PCBs). PCNs were ubiquitous at levels (∑70 PCNs = 2.5-150 pg g-1 wet weight) similar to those reported in other countries, with maximum concentrations observed in fish and fishery products from the North-East Atlantic Ocean. Their congener patterns further suggested unintentional releases of PCNs, while those of the other foodstuffs were correlated to the historical PCN profiles. Low risk from dietary exposure was estimated (∑70 PCNs-EDIs of 60-360 pg kg-1 bw d-1, ∑24 PCNs-TEQ-EDIs of 8 × 10-3-2.2 × 10-2 pg TEQ kg-1 bw d-1), with milk and dairy products being the highest contributors, followed by meat and meat products. Finally, the rather high contributions of PCNs to the total PCNs+PCDD/Fs+PCBs concentrations (0.9-50%, average of 9%) and the toxic equivalents (0.2-24%, average of 5%) show that these substances are not minor components of the PCNs+PCDD/Fs+PCBs cocktail.

Distribution of PCDD/Fs and PCBs at different locations in a circulating fluidised bed municipal solid waste incinerator.

This study investigates a circulating fluidised bed (CFB) incineration plant to examine the concentrations and fingerprints of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) at five locations downstream of the post-combustion zone. Sampling encompassed both flue gas and ash, spanning from the high-temperature superheater to the outlet of the baghouse filter, thus covering a wide range of flue gas temperatures. The analysis reveals a continuous increase in PCDD/F and PCB concentrations in the flue gas from the superheater to the inlet of the air pollution control system (APCS). The maximum concentrations observed were 75.8 ng/Nm3 for PCDDs, 219 ng/Nm3 for PCDFs, and 763 ng/Nm3 for PCBs. These values represent 9.14, 11.5, and 6.37 times their respective concentrations at the outlet of the high-temperature superheater. Concurrently, the levels of PCDD/Fs and dioxin-like PCBs (dl-PCBs) in the ash steadily increased along the cooling path of the flue gas within the plant. Comparing dl-PCBs to the total amount of 209 PCB congeners, it was evident that dl-PCBs exhibited a trend more akin to that of PCDD/Fs. A robust linear correlation was observed between dl-PCBs and PCDD/Fs (R2 = 0.99, p < 0.001), surpassing that between PCBs and PCDD/Fs (R2 = 0.92, p < 0.01), suggesting that dl-PCBs share closer formation pathways with PCDD/Fs. Additionally, elemental composition analysis of fly ash samples aimed to explore potential links between fly ash characteristics and PCDD/F and PCB formation. The Cl/S ratio increased from 1.58 to 5.13 with decreasing flue gas temperature. Principal component analysis (PCA) was employed to visualise the concentrations of PCDD/Fs and PCBs in the flue gas alongside elemental contents in the fly ash. With the exception of PCBs in ash, all other PCDD/Fs and PCBs in fly ash exhibited positive correlations with both carbon (C) and chlorine (Cl). Furthermore, a positive relationship between C/Cl and PCDD/Fs-PCBs in fly ash implies that fly ash serves as the primary reaction surface for dioxin generation during low-temperature heterogeneous catalytic reactions.

Dietary exposure levels to polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and non-ortho-polychlorinated biphenyls in US meat, poultry and siluriform fish from 2018 to 2019.

Daily dietary exposure estimates from beef, pork, chicken, turkey and siluriform fish were calculated using toxic equivalency (TEQ) data from the U.S. Department of Agriculture's survey of dioxins and dioxin-like compounds (DLCs) in the domestic meat supply and consumption data. Exposure estimates for the whole population and age groups were based on mean consumption of a commodity and mean or 90th percentile TEQ dioxin levels from the survey. Ratios of the exposure estimates to the U.S. EPA oral reference dose (RfD) of 0.7 pg TEQ/kg bw/day were calculated to determine if domestic meat might contribute materially to consumer exposure. In general, normal consumption of lean beef, pork, chicken and turkey will not cause exposures exceeding the RfD. Non-lean meats will have higher dioxin levels as dioxins accumulate in fat, therefore consumption of non-lean meat might cause higher exposure than compared to lean meat. However, on a mean basis, none of the exposure estimates for non-lean beef, pork, chicken or turkey exceeded the RfD for any of the age groups. For some age groups, especially toddlers, there are commodities such as non-lean beef in the 90th percentile of dioxin TEQs and siluriform fish that might exceed the RfD on occasion.

Feed materials - Levels and characteristic profiles of dioxins and PCBs.

Dioxins (PCDD/PCDF) are toxic compounds that are ubiquitous in the environment; although present in low concentrations, they are persistent and highly toxic and they bioaccumulate in food chains. Therefore, it is very important that feed is free of these types of contaminants, because otherwise they can become a source that can negatively affect animal health and the safety of food of animal origin. The aim of the study was to comprehensively assess the concentrations of dioxins and polychlorinated biphenyls (PCBs) in a variety of feed materials available on the Polish market. In addition, characteristic profiles of congeners for given categories of feeds were investigated and defined. Approximately 95 % of the 523 samples of various feed materials tested over seven years (2013-2018 and 2022) met the requirements of European Union feed law (Commission Regulation 277/2012/EU). The highest average PCDD/PCDF/dl-PCB concentrations were found in fish oils and meal and were respectively 1.17 ± 0.78 and 5.51 ± 4.51 ng WHO-TEQ/kg of feed at 12 % moisture. Median and background level concentrations of PCDD/PCDFs, dl-PCBs, PCDD/PCDF/dl-PCBs, and ndl-PCBs were significantly lower than their average concentrations for each individual feed material category. The WHO-TEQ profiles enabled the identification of three different characteristic profiles in feed materials.

Alteration of biomass toxicity in torrefaction - A XDS-CALUX bioassay study.

Torrefaction constitutes one of the promising technologies for the management of waste biomass and the production of high-carbon products for combustion, gasification, adsorption of pollutants or soil treatment. Unfortunately, waste biomass may be contaminated with toxic persistent organic pollutants, such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) and dioxin-like biphenyls (dl-PCB). Literature does not provide consistent measurements on how the low-temperature thermochemical processing, such as torrefaction, affects the toxicity of biomass. This contribution assesses how a torrefaction treatment, conducted at 200 °C, modifies the toxicity due to PCDD/PCDF/dl-PCB in biomass. We deploy the XDS-CALUX biotest on five types of waste biomass (sewage sludge, tree bark, cattle manure, spent coffee ground, common reed), before and after treatment. The content of total dioxin- & biphenyl fraction compounds in the raw biomass, investigated in this study, varies from 0.14 to 3.67 pg BEQ·g-1d.m., and in the torrefied biomass between 0.17 and 6.00 pg BEQ·g-1d.m.; BEQ stands for bioanalytical equivalent. This increase is statistically insignificant at p = 0.05, taking into account all types of examined biomass. This proves that low-temperature torrefaction cannot detoxify biomass, i.e., chars, produced from biomass characterized by elevated concentration of PCDD/PCDF/dl-PCB, will reflect the contamination of the feedstocks. With respect to heavy metals, we conclude that only the content of Cd in biomass, and, to a lesser extent, the abundance of Cu and Fe, modify the toxicity of this material during its thermochemical treatment at low temperature.

Dioxins emissions from bio-medical waste incineration: A systematic review on emission factors, inventories, trends and health risk studies.

COVID-19 has aggravated the biomedical waste generation all over the world and the concern for its safe disposal is on the rise. The vast majority of healthcare systems employ incineration as their treatment method considering its agility to reduce the waste volume by up to 95-96% and high-temperature inactivation of infectious biological materials. However, incinerator emission is a significant contributor of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) according to various national inventories across the globe. Bio-Medical Waste Incinerators (BMWIs) are the dominant form of incinerator plants in developing nations and hence BMWI emissions were found to contribute lion's share of national dioxins inventories in most of these countries. The Stockholm Convention on POPs played a key role in imbibing significant urge on the dl-POPs monitoring studies of incinerators internationally and on controlling the average incinerator emission levels. Though many national/international agencies endorse a stringent incinerator stack emission standard of 0.1 ngTEQ/Nm3, there are some differences observed in nation-to-nation regulatory scenarios. This paper reviews and reports on the dioxins emission and health risk studies associated with bio-medical waste incineration over the last three decades (1990-2020) with a comprehensive spatial and temporal emission trend analysis. An overview of important national and international regulations, national inventories and emission factors for the biomedical waste incineration sector is also reviewed in detail. The study observes that continuous regulatory monitoring and logical relaxations can enhance the performance of the existing facilities ensuring low emissions and minimal risk.

Dioxins and furans maternal transfer: A study of breast milk and cord serum levels among Lebanese mothers and associations with newborn anthropometric measurements.

Dioxins and furans (PCDD/Fs) are anthropogenic pollutants that persist in the environment for long years, bioaccumulating in food & contaminating humans. In pregnancy, they can transfer through the placenta and reach the fetus, which negatively affects fetal growth. They can also reach newborns through breastfeeding. In this study, we focused on this critical subpopulation and identified the presence of PCDD/Fs among pregnant women in breast milk (n = 41) and cord serum (n = 49); we assessed the correlation between different matrices, evaluated the predictors and associations with newborn anthropometric measurements. Over 70.7 % of PCDD/Fs were detected in breast milk and 46.9-55.1 % in cord serum. Cord/maternal serum and breast milk to maternal serum ratios were > 1 with a significant positive Spearman correlation (0.669-0.729). Breast milk & maternal serum PCDD/Fs were associated inversely with age and positively with red meat intake. Cord serum PCDD/Fs were inversely associated with pre-pregnancy weight loss and passive smoking. Parity and gestational weight gain showed positive associations with Z-scores at birth. Z-score differences showed negative and positive associations with passive smoking and pre-pregnancy BMI respectively.

The 2022 world health organization reevaluation of human and mammalian toxic equivalency factors for polychlorinated dioxins, dibenzofurans and biphenyls.

In October 2022, the World Health Organization (WHO) convened an expert panel in Lisbon, Portugal in which the 2005 WHO TEFs for chlorinated dioxin-like compounds were reevaluated. In contrast to earlier panels that employed expert judgement and consensus-based assignment of TEF values, the present effort employed an update to the 2006 REP database, a consensus-based weighting scheme, a Bayesian dose response modeling and meta-analysis to derive "Best-Estimate" TEFs. The updated database contains almost double the number of datasets from the earlier version and includes metadata that informs the weighting scheme. The Bayesian analysis of this dataset results in an unbiased quantitative assessment of the congener-specific potencies with uncertainty estimates. The "Best-Estimate" TEF derived from the model was used to assign 2022 WHO-TEFs for almost all congeners and these values were not rounded to half-logs as was done previously. The exception was for the mono-ortho PCBs, for which the panel agreed to retain their 2005 WHO-TEFs due to limited and heterogenous data available for these compounds. Applying these new TEFs to a limited set of dioxin-like chemical concentrations measured in human milk and seafood indicates that the total toxic equivalents will tend to be lower than when using the 2005 TEFs.

Characteristics of the pyrolytic products and the pollutant emissions at different operating stages from a pilot waste tire pyrolysis furnace.

Pyrolysis is considered a highly practical, cost-effective, and environment-friendly technology for waste tires disposal. In this study, pyrolysis processes of waste tires were conducted in a pilot scale furnace feeding at 30 kg/h. The properties of pyrolytic products and the distribution patterns of pollutants generated in different operating stages (start-up, steady, and shut-down) were investigated. The pyrolytic gas in the steady state had a high caloric value of 10799 kJ/Nm3, valuable as heating source for pyrolysis. The elements of sulfur and zinc were effectively fixed as ZnS in the pyrolytic carbon. The basic properties of pyrolytic oil were in line with commercial diesel oil except for the lower flash point. Heavy metals were mainly concentrated in the pyrolytic carbon, with slightly higher concentrations in the steady state. Moreover, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were mainly concentrated in the pyrolytic oil, with predominated low-ring PAHs and high chlorinated PCDD/Fs. The concentrations of PAHs and PCDD/Fs in the gas phase were higher during the start-up stage due to the memory effect, whereas were effectively reduced during the steady stage. The concentration of PAHs in the solid phase was highest during the furnace start-up and lowest in the shut-down stage. In contrast to PAHs, the PCDD/Fs in the solid phase reached their highest concentration during the shut-down stage, which was mainly affected by temperature. The results provide guidance for the reducing of pollutant emissions and the recycling of pyrolytic products.

Occurrence, physicochemical properties and environmental behavior of polychlorinated dibenzothiophenes: A comprehensive review and future perspectives.

Polychlorinated dibenzothiophenes (PCDTs) are a form of emerging pollutant that has attracted great attention due to their structural resemblance to dioxins, which cast detrimental influence on the ecosystem and human health. This review shows the current status of research on PCDTs, focusing on their environmental occurrence, physicochemical properties, environmental behavior, and toxicity. Studies have suggested that the steps leading to the formation of PCDTs resemble those generating polychlorinated dibenzo-p-dioxin/dibenzofurans (PCDD/Fs), indicating their probable origin from the same sources. Furthermore, they may undergo a dechlorination process as a result of their photodegradation in the environment and metabolic reaction occurring within organisms, which could result in the conversion of these substances into additional pollutants like dibenzothiophene. PCDTs exist widely in the environmental media and have high logKOW values (>4.0), indicating their tendency to bioaccumulate. Moreover, the prediction results of EPI (Estimation Program Interface) Suite demonstrated a strong accumulation capacity for tetra-CDTs in fish compared to other chlorinated PCDTs. The biotransformation half-life of PCDTs would prolong with an increasing number of substituted Cl atoms in fish. A limited number of studies have also suggested that PCDTs can cause damage to the liver and immune system in living organisms, and the toxicity of PCDTs depends on the number and position of substituted Cl atoms. Future studies should be conducted on processes causing PCDT toxicity as well as their behavior and fate in actual environments.

Serum PCDD/F levels in metropolitan populations living near a municipal solid waste incinerator in Eastern China.

Ambient exposure to polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) is suspected to cause adverse human health outcomes. Herein, serum samples from 40 residents in the neighborhood of a municipal solid waste incinerator (MSWI) in the metropolitan area were measured for PCDD/Fs. The mean toxic equivalent (TEQ) concentration of total PCDD/Fs in human serum samples was 16.8 pg TEQ/g lipid. Serum PCDD/F levels were significantly higher in residents adjacent to the MSWI than in those from areas far from the emission source (p < 0.01). In addition, there were no significant associations between serum PCDD/Fs levels and factors, such as gender, age, and BMI in donors. For non-occupationally exposed populations, OCDD and 1,2,3,7,8-PeCDD in serum are available as indicators of total PCDD/Fs and total TEQ, respectively. The atmospheric PCDD/Fs levels were within a relatively low range in areas upwind and downwind of the MSWI. The results of the principal component analysis showed a distinct difference in PCDD/F congener patterns between air and serum samples, suggesting inhalation exposure could have a limited influence on the human body burden. Our findings will deepen the current knowledge of endogenous PCDD/F exposure in urban populations, and also facilitate public health protection strategies near MSWIs.

Pubertal progression in relation to peripubertal exposure to organochlorine chemicals in a cohort of Russian boys.

Background: Peripubertal concentrations of serum dioxins and polychlorinated biphenyls (PCBs) have demonstrated associations with altered age of pubertal onset and sexual maturity in boys, but associations with pubertal progression have received less attention. Methods: The Russian Children's Study is a prospective cohort of 516 boys enrolled in 2003-2005 at age 8 or 9 and followed annually up to 19 years of age. Serum concentrations of dioxin-like toxic equivalents (TEQs), polychlorinated dibenzodioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and non-dioxin-like PCBs (NDL-PCBs) and whole blood lead levels (BLLs) were quantified from blood samples collected at study entry (age 8-9). Testicular volume (TV) was assessed annually using a Prader orchidometer. Pubertal trajectories were identified by applying Group-Based Trajectory Models (GBTMs) to TV measured from ages 8-19. Associations of peripubertal serum TEQs, PCDDs, PCDFs, and NDL-PCBs with specific progression trajectories were modeled using multinomial logistic regression, adjusting for each boy's birthweight, and for BLL, body mass index and nutritional factors at study entry. Results: Among 489 eligible boys with available exposure measures, we identified three pubertal trajectories using GBTMs: slower (34% of boys), moderate (48%) and faster (18%). Boys with higher peripubertal serum TEQs had higher adjusted odds of being in the moderate versus faster trajectory (adjusted odds ratio (aOR) 1.79, 95% CI 1.01, 3.13) and the slower versus faster trajectory (aOR 1.52, 95% CI 0.82, 2.78) per 1 log unit increase in serum TEQs. Boys with higher peripubertal serum PCDFs had higher adjusted odds of being in the moderate compared to the faster trajectory (aOR 1.92, 95% CI 1.20, 3.03) and of being in the slower versus the faster trajectory (aOR 1.42, 95% CI 0.91, 2.33) per 1 log unit increase. Boys with higher NDL-PCBs had higher adjusted odds of being in the faster trajectory versus the moderate (aOR 2.56, 95% CI 0.91-7.20) or slower (aOR 3.31, 95% CI 1.07, 10.25) trajectory. Boys with higher blood lead levels also had higher adjusted odds of being in the slower trajectory of pubertal progression, compared to either the faster (aOR 1.47, 95% CI 0.89, 2.44) or moderate (aOR 1.20, 95% CI 0.83, 1.75) trajectories, per 1 log unit increase in BLL, although these associations did not attain statistical significance. Conclusion: Boys' peripubertal exposure to dioxins and certain PCBs may alter pubertal progression.

Hospital waste incinerator ash: characteristics, treatment techniques, and applications (A review).

The amount of medical waste generated has increased enormously since the COVID-19 outbreak. An incineration process is the main method that is usually used to treat this waste, causing an increase in both medical waste bottom ash (MWBA) and medical waste fly ash (MWFA). In this work, the physical and chemical characteristics of MWFA and MWBA were reviewed. This ash contains high levels of polychlorinated dibenzo-p-dioxin (PCDD), dibenzofurans (PCDFs), and heavy metals. Furthermore, medical waste ash appears to have high leachability in the toxicity characteristics leaching procedure (TCLP) test and the European standard test (EN 12457). Owing to its toxicity, medical ash can be treated using various methods prior to disposal based on the covered review. These techniques include chemical, supercritical fluid, cement-based, melting, microwave, and mechanochemical techniques. The shortcomings of some of these treatment methods have been identified, such as the emission of high levels of chlorine from the melting technique, limited applications of the flotation method on the industrial scale, long-term stability of leachate treated by cement-based methods that have not been confirmed yet, and high energy consumption in the supercritical technique. This review also covers possible applications of medical waste ash in cement production, agriculture, and road construction.

Low-temperature catalytic oxidation of PCDD/Fs over MnCeCoOx/PPS catalytic filter.

Catalytic destruction of nitrogen oxides (NOx) combined with dust removal technique has attracted much attention, yet the application in the solid waste incineration air pollution control process is still lacking due to the complex flue gas atmosphere. In this work, the Mn-Ce-Co-Ox catalyst-coated polyphenylene sulfide (PPS) filter fiber with efficient dust removal and low-temperature polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) destruction has been prepared with a redox-precipitation method. The catalyst was uniformly grown around the PPS fiber with appropriate catalyst loading. The effects of several key operating parameters (e.g., reaction temperature, catalyst loading amount, and filtration velocity) on the catalytic efficiency were comprehensively investigated. The results show that the Mn-Ce-Co-Ox/PPS has a decomposition yield of 78.0% in PCDD/Fs and 96% in nitric oxide (NO) conversion at 200 °C. The poisoned catalytic filter exhibits a removal efficiency of 88.6% for PCDD/Fs. In addition, the catalytic filter can completely reject particles smaller than 1.0 µm with a low filtration resistance. Therefore, this efficient and energy-conserving catalytic filter shows promising applications in flue gas pollution treatments.